|
|
Home > Weather Instruments > Wind Speed & Direction > Anemometers > Wireless Merlin Anemometer by Maximum Weather Instruments
Home > Weather Instruments > Maximum Weather Instruments > Wireless Merlin Anemometer by Maximum Weather Instruments
Wireless Merlin Anemometer by Maximum Weather Instruments | 
main | detail 1
| | | Digital display of important wind conditions now with wireless sensors.
No cables makes it easier than ever to bring the weather story into your home.
This wireless version of the popular Merlin instrument operates at a powerful 900mhz which allows for up to 300ft transmission distance between sensor and read-out, in typical residential installations. When wind conditions change, Merlin receives updates every 2 seconds. The wireless rooftop transmitter operates on solar power and has a built-in rechargeable NiCad battery backup for up to 7 days of operation without sunlight.
This digital instrument records changes and trends as well as present wind conditions. Readings are given in four modes: Present displays existing wind conditions. Peak gives speed and direction of highest gust since last reset. Average reveals average wind speed and direction since last reset. Forecast compares the most recent 12-minute average with the previous 12-minutes.
Features user-selectable units of measurement for speed (MPH, Knots, km/h or m/s). Can interface with Wireless Mystic to compute wind-chill. Stored data is protected by an internal 10-year backup system.
Ships complete with solar powered 900mhz rooftop transmitter, NiCad batteries, AC adapter (for indicator), sensors and mounting hardware. A single 900mhz Wireless Receiver (sold separately) is required to operate this system.
- Accuracy: Speed ±3 MPH, Direction ±11.25º.
- Dimensions: 6.5" Outside Diameter by 2.75" Deep.
- 5 year warranty.
Now available in a Chrome or Satin Nickel case for $25.00 extra. Black dial only.
| |
|  Wireless ReceiverWireless 900mhz receiver for use with wireless Maximum Weather Instruments.
One 900mhz receiver is required at each wireless instrument location.
A single receiver can collect transmissions from as many transmitters as your system includes. That is, one receiver will serve all wind, temperature and rainfall transmitters within a 300ft radius.
If you wish to install instruments in different rooms, you will need one receiver for each location.
The wireless receiver should be located in the wall behind the instrument display, and powered by any of the AC adaptors used to power a wireless instrument.
Dimensions of the wireless receiver are: 3.74"L x 2.25"W x 1"H
| |
Questions? Call us Toll Free 1-800-646-1203 for friendly, expert advice.
|
|
 |
60-Day Guarantee
no questions asked! |
|
|
|
|
|
|
